中文 English
Welcome to Gwas Power! Today is 03/29/2024
Sitemap Favorite Online

QR-Code call
News
Recommend Products
Contact Us

Gwas Power
Service Call:+86 028-65526686
Phone:+86 028-65526686
Mobile:+86 151 8448 7333
E-Mail:chinagewasi@163.com
Web:www.china-gwas.com.cn
Address:GWAS workshop, industrial park, pixian,chengdu,Sichuan

You are here: Home » News »  » How to carry out the maintenance of Cummins generator set?

How to carry out the maintenance of Cummins generator set?

Author:Gwas Power  Click:471 Published:2024-03-29

Because Cummins generators have great competitive advantages in terms of economy, power, and reliability, they have been welcomed by many 

sellers in the market. A lot of people spend the most money to buy Cummins generators, so how do we maintain Cummins generators when we use 

them? please follow me to learn more about the maintenance of Cummins generators. 

一. The combination of new engines is the key to the maintenance of the Cummins Generator Unit. Therefore, during the initial use, it is necessary 

to pay attention to the low speed when the car starts. And the generator set is strictly prohibited for more than five minutes when operating full load 

at full speed. Regular attention should be paid to the working state of the temperature, pressure, and water temperature measurements.

二. The most important thing in the maintenance process of the Cummins generator is the start of the engine, so check the cooling surface every 

day before starting the engine. After the engine starts for 15 seconds, observe the change in the oil pressure. And after the first daily start, start the 

low-speed heater five minutes later.

三. The engine must be operated at a speed of 3 to 5 minutes before the engine stops, so that the lubricating oil can take away enough heat, which 

is very important in the reinforced engine.

Finally, in the maintenance of the Cummins generator, one of the most important things is that if the temperature of the coolant is below 60 degrees 

or above 100 degrees, the cause of the abnormal coolant temperature must be found when continuously starting; it cannot take a long time to start 

abnormally, and the time to operate at the maximum torque speed cannot be more than 30 seconds.

Recommend News