Chengdu generator sets oil replacement method

The Chengdu Generator Unit plays an important role in people's lives; it provides the people with electricity to live and promotes the rapid 

development of the national economy. With the continuous development of science and technology, today's generators are gradually moving towards 

energy conservation, environmental protection, and lightweight and beautiful development. It shows many advantages in the process of use, but we 

also need to be clear about some of the considerations of use to ensure that it can work properly. Here is a description of how to replace the engine 

oil.

When replacing the generator, put it on a horizontal surface, start the engine, and after a few minutes, the temperature of the oil will rise, and now 

we can turn off the engine. Then remove the pillar oil bolt on the mechanical equipment, put an oil tank underneath the motor, and then take the oil 

discharge screw off so that the oil in the machinery is removed from the curved axle tank.

In the process of oil replacement, the oiled screw seal circle and the rubber circle should be checked; if damage is detected, they should be replaced 

immediately. Then tighten the oil screw, and then add the oil to the mechanical equipment; the position should be in the higher position of the oil 

scale mesh grid.

In the working process, the Chengdu generator set is to convert some other energy into mechanical energy, then drive the generator to generate 

electricity, and then convert this mechanical energy into electrical energy. In order to ensure that it can generate electricity normally in the 

process of use, users need to master the correct method of replacing oil to ensure the use of mechanical equipment.